#!/usr/bin/env python3 # -*- coding: utf-8 -*- """ generate_fill_mesh.py ===================== 为 3D 打印模型生成"眼镜 <-> 脸部"之间镂空区域的填充网格。 输入（与本脚本同目录）: 632723.obj 完整模型(封闭网格) index.txt 眼镜区域的顶点索引(每行一个, 1-based) 输出(同目录): fill_mesh.obj 填充网格(独立、封闭、水密) 632723_filled.obj 原模型 + 填充 合并后的模型(可直接用于切片打印) fill_preview.png 前视图深度预览(供人工检查) 仅依赖 numpy 与 PIL。 """ import numpy as np from collections import deque from PIL import Image, ImageDraw class FillMeshGenerator: """眼镜-脸部填充网格生成器""" # ====================================================================== # 参数配置 # ====================================================================== IN_OBJ = "632723.obj" IN_IDX = "index.txt" OUT_FILL = "fill_mesh.obj" OUT_MERGED = "632723_filled.obj" OUT_PREVIEW = "fill_preview.png" RES = 0.1 # 栅格分辨率 X0, X1 = -10.2, 10.2 Y0, Y1 = 9.2, 19.8 RY0, RY1 = 9.7, 19.3 # 填充区域 y 裁剪(只处理正面眼镜部分) SEP = 0.25 # 区分前后表面的最小 z 间距 FLUSH = 0.15 # 填充前表面距镜框前面的距离(与镜框平齐, 留嵌入余量) EMBED_BOT = 0.6 # 填充底面嵌入脸部深度 SHELL_MAX = 3.0 # 无真实脸面处的填充厚度上限(相对前表面) FACE_MIN = 2.0 # 脸面低于此值视为误标伪面(后脑等), 不作填充底面 CLAMP_BACK = 0.4 # 距最后表面的安全距离(防穿出后脑) GAP_MIN = 0.25 # 填充最小厚度 SIGMA = 2.0 # 高度场平滑 sigma(格) ERODE = 2 # 足迹腐蚀(格) 0.2, 与膨胀0.3配合净外扩0.1(补偿边界平滑收缩) BSTEP = 0.18 # 边界重采样步长 BITER = 25 # 边界 Laplacian 平滑迭代 BLAM = 0.6 # 边界平滑系数 TOL = 1e-4 # Jacobi 收敛阈值 def __init__(self, in_obj=None, in_idx=None): if in_obj: self.IN_OBJ = in_obj if in_idx: self.IN_IDX = in_idx self.report = [] def log(self, s): """日志记录""" print(s) self.report.append(str(s)) # ====================================================================== # IO 工具 # ====================================================================== def parse_obj(self, path): """解析 OBJ 文件, 返回顶点数组和面数组""" vs, fs = [], [] with open(path) as f: for line in f: if line.startswith("v "): p = line.split() vs.append((float(p[1]), float(p[2]), float(p[3]))) elif line.startswith("f "): p = line.split() fs.append((int(p[1].split("/")[0]) - 1, int(p[2].split("/")[0]) - 1, int(p[3].split("/")[0]) - 1)) return np.asarray(vs), np.asarray(fs, dtype=np.int64) # ====================================================================== # 形态学操作 # ====================================================================== def dilate_8(self, mask, iterations=1): """二值图像膨胀 (8-邻域)""" result = mask.copy() for _ in range(iterations): nm = result.copy() nm[1:, :] |= result[:-1, :]; nm[:-1, :] |= result[1:, :] nm[:, 1:] |= result[:, :-1]; nm[:, :-1] |= result[:, 1:] nm[1:, 1:] |= result[:-1, :-1]; nm[:-1, :-1] |= result[1:, 1:] nm[1:, :-1] |= result[:-1, 1:]; nm[:-1, 1:] |= result[1:, :-1] result = nm return result def erode_4(self, mask, iterations=1): """二值图像腐蚀 (4-邻域)""" result = mask.copy() for _ in range(iterations): ne = result.copy() ne[1:, :] &= result[:-1, :]; ne[:-1, :] &= result[1:, :] ne[:, 1:] &= result[:, :-1]; ne[:, :-1] &= result[:, 1:] result = ne return result def dilate_8_inf(self, field, iterations=1): """浮点数场膨胀 (8-邻域取最大值)""" result = field.copy() for _ in range(iterations): gf = result.copy() for dj, di in ((1,0),(-1,0),(0,1),(0,-1),(1,1),(1,-1),(-1,1),(-1,-1)): s = np.full_like(result, -np.inf) if dj == 1: s[1:, :] = result[:-1, :] elif dj == -1: s[:-1, :] = result[1:, :] elif di == 1: s[:, 1:] = result[:, :-1] elif di == -1: s[:, :-1] = result[:, 1:] elif dj == 1 and di == 1: s[1:, 1:] = result[:-1, :-1] elif dj == 1 and di == -1: s[1:, :-1] = result[:-1, 1:] elif dj == -1 and di == 1: s[:-1, 1:] = result[1:, :-1] else: s[:-1, :-1] = result[1:, 1:] gf = np.maximum(gf, s) result = gf return result def erode_4_inf(self, field, iterations=1): """浮点数场腐蚀 (4-邻域取最小值)""" result = field.copy() for _ in range(iterations): mn = result.copy() for dj, di in ((1,0),(-1,0),(0,1),(0,-1)): s = np.full_like(result, np.inf) if dj == 1: s[1:, :] = result[:-1, :] elif dj == -1: s[:-1, :] = result[1:, :] elif di == 1: s[:, 1:] = result[:, :-1] elif di == -1: s[:, :-1] = result[:, 1:] mn = np.minimum(mn, s) result = mn return result def flood_outside(self, mask): """从窗口边界洪泛, 标记外部; 未标记且非 mask 即为洞""" outside = np.zeros_like(mask, bool) dq = deque() h, w = mask.shape for i in range(w): for j in (0, h - 1): if not mask[j, i] and not outside[j, i]: outside[j, i] = True; dq.append((j, i)) for j in range(h): for i in (0, w - 1): if not mask[j, i] and not outside[j, i]: outside[j, i] = True; dq.append((j, i)) while dq: j, i = dq.popleft() for dj, di in ((1,0),(-1,0),(0,1),(0,-1)): nj, ni = j + dj, i + di if 0 <= nj < h and 0 <= ni < w: if not mask[nj, ni] and not outside[nj, ni]: outside[nj, ni] = True; dq.append((nj, ni)) return ~outside & ~mask def largest_component_8(self, mask): """取 mask 的最大连通分量 (8-邻域)""" labels = np.zeros(mask.shape, np.int32) cur = 0 for j in range(mask.shape[0]): for i in range(mask.shape[1]): if mask[j, i] and labels[j, i] == 0: cur += 1 q = deque([(j, i)]) labels[j, i] = cur while q: y, x = q.popleft() for dy, dx in ((1,0),(-1,0),(0,1),(0,-1), (1,1),(1,-1),(-1,1),(-1,-1)): ny, nx = y + dy, x + dx if (0 <= ny < mask.shape[0] and 0 <= nx < mask.shape[1] and mask[ny, nx] and labels[ny, nx] == 0): labels[ny, nx] = cur q.append((ny, nx)) sizes = np.bincount(labels.ravel()) sizes[0] = 0 main_label = int(np.argmax(sizes)) stray = int(mask.sum() - sizes[main_label]) return labels == main_label, stray # ====================================================================== # 数值工具 # ====================================================================== def pbasis(self, x, y): """二次多项式基函数: [1, x, y, x^2, xy, y^2]""" return np.stack([np.ones_like(x), x, y, x * x, x * y, y * y], 1) def cross3(self, o, a, b): """2D 叉积 (o->a) x (o->b)""" return (a[0] - o[0]) * (b[1] - o[1]) - (a[1] - o[1]) * (b[0] - o[0]) def signed_volume(self, verts, faces): """计算有符号体积""" a = verts[faces[:, 0]]; b = verts[faces[:, 1]]; c = verts[faces[:, 2]] return float(np.sum(np.einsum('ij,ij->i', a, np.cross(b, c))) / 6.0) def inside_mask(self, pts, msk): """判断点是否在 mask 内""" ii = np.clip(((pts[:, 0] - self.X0) / self.RES).astype(int), 0, msk.shape[1] - 1) jj = np.clip(((pts[:, 1] - self.Y0) / self.RES).astype(int), 0, msk.shape[0] - 1) return msk[jj, ii] def bilinear(self, grid, pts): """双线性插值""" fx = (pts[:, 0] - self.X0) / self.RES fy = (pts[:, 1] - self.Y0) / self.RES i = np.clip(np.floor(fx).astype(int), 0, grid.shape[1] - 2) j = np.clip(np.floor(fy).astype(int), 0, grid.shape[0] - 2) tx = np.clip(fx - i, 0, 1); ty = np.clip(fy - j, 0, 1) return (grid[j, i] * (1 - tx) * (1 - ty) + grid[j, i + 1] * tx * (1 - ty) + grid[j + 1, i] * (1 - tx) * ty + grid[j + 1, i + 1] * tx * ty) # ====================================================================== # 平滑与插值 # ====================================================================== def smooth_valid(self, field, valid, sigma=None, it=1): """归一化高斯卷积(只在 valid 上)""" if sigma is None: sigma = self.SIGMA rad = int(3 * sigma) k = np.exp(-0.5 * (np.arange(-rad, rad + 1) / sigma) ** 2) field = field.copy() for _ in range(it): acc = np.zeros_like(field); accw = np.zeros_like(field) val = valid & np.isfinite(field) G = np.where(val, field, 0.0); M = val.astype(float) tmp = np.zeros_like(G); tmpw = np.zeros_like(G) for d in range(-rad, rad + 1): if d == 0: tmp += G * k[rad]; tmpw += M * k[rad] elif d > 0: tmp[d:, :] += G[:-d, :] * k[rad + d]; tmpw[d:, :] += M[:-d, :] * k[rad + d] tmp[:-d, :] += G[d:, :] * k[rad + d]; tmpw[:-d, :] += M[d:, :] * k[rad + d] acc += tmp; accw += tmpw tmp = np.zeros_like(G); tmpw = np.zeros_like(G) for d in range(-rad, rad + 1): if d == 0: tmp += acc * k[rad]; tmpw += accw * k[rad] elif d > 0: tmp[:, d:] += acc[:, :-d] * k[rad + d]; tmpw[:, d:] += accw[:, :-d] * k[rad + d] tmp[:, :-d] += acc[:, d:] * k[rad + d]; tmpw[:, :-d] += accw[:, d:] * k[rad + d] out = np.where(tmpw > 1e-9, tmp / np.maximum(tmpw, 1e-9), field) field = np.where(val, out, field) return field def laplace_fill(self, field, known, iters=6000): """Dirichlet: known 固定, 其余解调和方程""" F = field.copy() with np.errstate(all='ignore'): mean_known = np.nanmean(F[known]) if known.any() else 0.0 if not np.isfinite(mean_known): mean_known = 0.0 F[~known] = np.where(np.isfinite(F[~known]), F[~known], mean_known) for it in range(iters): avg = np.zeros_like(F) for dj, di in ((1,0),(-1,0),(0,1),(0,-1)): s = np.roll(F, (dj, di), axis=(0, 1)) ok = np.ones_like(F, bool) if dj == 1: ok[0, :] = False if dj == -1: ok[-1, :] = False if di == 1: ok[:, 0] = False if di == -1: ok[:, -1] = False avg += np.where(ok, s, F) G = np.where(known, F, avg / 4.0) df = np.abs(G - F)[~known] delta = np.nanmax(df) if df.size and np.isfinite(df).any() else 0.0 F = G if delta < self.TOL * self.RES: break return F # ====================================================================== # 步骤 1: 加载模型并分类眼镜面 # ====================================================================== def load_and_classify(self): """加载模型, 通过边连通主分量提取真眼镜物体""" self.log("== 1. 读入模型 ==") V, F = self.parse_obj(self.IN_OBJ) idx = np.loadtxt(self.IN_IDX, dtype=np.int64) - 1 ism = np.zeros(len(V), bool) ism[idx] = True face_g = ism[F].any(1) self.log(f" 顶点 {len(V)}, 面 {len(F)}, 眼镜标记顶点 {len(idx)}") # 边连通主分量提取 emap = {} for fi in np.where(face_g)[0]: a, b, c = F[fi] for u, v in ((a, b), (b, c), (c, a)): e = (u, v) if u < v else (v, u) emap.setdefault(e, []).append(fi) seen = set() best = [] for fi in np.where(face_g)[0]: if fi in seen: continue comp, stack = [], [fi] seen.add(fi) while stack: f0 = stack.pop() comp.append(f0) a, b, c = F[f0] for u, v in ((a, b), (b, c), (c, a)): e = (u, v) if u < v else (v, u) for f2 in emap[e]: if f2 not in seen: seen.add(f2) stack.append(f2) if len(comp) > len(best): best = comp face_g = np.zeros(len(F), bool) face_g[best] = True self.log(f" 眼镜物体 = 边连通主分量 {len(best)} 面, " f"剥离误标皮肤 {int((ism[F].any(1)).sum() - len(best))} 面") return V, F, face_g # ====================================================================== # 步骤 2: 栅格化 # ====================================================================== def rasterize(self, V, F, face_g): """栅格化三角形到高度场""" W = int(round((self.X1 - self.X0) / self.RES)) + 1 H = int(round((self.Y1 - self.Y0) / self.RES)) + 1 self.log(f"== 2. 栅格化 (窗口 x[{self.X0},{self.X1}] y[{self.Y0},{self.Y1}], " f"res={self.RES}, {W}x{H}) ==") gz1 = np.full((H, W), -np.inf) # 眼镜最前表面 gz2 = np.full((H, W), -np.inf) # 眼镜第二表面(镜框管背面) fz = np.full((H, W), -np.inf) # 非眼镜最前表面(脸) bz = np.full((H, W), np.inf) # 全网格最后表面(后脑) inwin = ((V[:, 0] > self.X0 - 0.5) & (V[:, 0] < self.X1 + 0.5) & (V[:, 1] > self.Y0 - 0.5) & (V[:, 1] < self.Y1 + 0.5)) fwin = inwin[F].all(1) self.log(f" 窗口内三角形 {int(fwin.sum())} (其中眼镜 {(face_g & fwin).sum()})") A, B, C = V[F[:, 0]], V[F[:, 1]], V[F[:, 2]] for t in np.where(fwin)[0]: ax, ay, az = A[t]; bx, by, bz_ = B[t]; cx, cy, cz = C[t] g = face_g[t] i0 = max(int((min(ax, bx, cx) - self.X0) / self.RES), 0) i1 = min(int((max(ax, bx, cx) - self.X0) / self.RES), W - 1) j0 = max(int((min(ay, by, cy) - self.Y0) / self.RES), 0) j1 = min(int((max(ay, by, cy) - self.Y0) / self.RES), H - 1) if i1 < i0 or j1 < j0: continue v0x, v0y = cx - ax, cy - ay v1x, v1y = bx - ax, by - ay d00 = v0x * v0x + v0y * v0y d01 = v0x * v1x + v0y * v1y d11 = v1x * v1x + v1y * v1y den = d00 * d11 - d01 * d01 if abs(den) < 1e-14: continue for j in range(j0, j1 + 1): py = self.Y0 + j * self.RES for i in range(i0, i1 + 1): px = self.X0 + i * self.RES v2x, v2y = px - ax, py - ay d02 = v0x * v2x + v0y * v2y d12 = v1x * v2x + v1y * v2y u = (d11 * d02 - d01 * d12) / den v = (d00 * d12 - d01 * d02) / den if u < 0 or v < 0 or u + v > 1: continue z = az + u * (cz - az) + v * (bz_ - az) if g: if z > gz1[j, i] + 1e-9: if z - gz1[j, i] > self.SEP and gz1[j, i] > -np.inf: gz2[j, i] = max(gz2[j, i], gz1[j, i]) gz1[j, i] = z elif z < gz1[j, i] - self.SEP and z > gz2[j, i]: gz2[j, i] = z else: if z > fz[j, i]: fz[j, i] = z if z < bz[j, i]: bz[j, i] = z have_g1 = np.isfinite(gz1) & (gz1 > -1e30) have_g2 = np.isfinite(gz2) & (gz2 > -1e30) have_f = np.isfinite(fz) & (fz > -1e30) have_b = np.isfinite(bz) & (bz < 1e30) g1f = have_g1 self.log(f" 有眼镜表面格 {have_g1.sum()}, 管状(双面) {have_g2.sum()}, " f"有脸面 {have_f.sum()}, 有背面 {have_b.sum()}") return gz1, gz2, fz, bz, have_g1, have_g2, have_f, have_b, g1f, W, H # ====================================================================== # 步骤 3: 构建足迹 mask 与填充区域 R # ====================================================================== def build_footprint(self, g1f): """构建眼镜足迹 mask 和填充区域 R""" self.log("== 3. 眼镜足迹 / 填充区域 R ==") mask = g1f.copy() # 取主分量 mask, n_stray = self.largest_component_8(mask) self.log(f" 足迹取主分量: 剔除杂散块 {n_stray} 格 (误标到镜框外的皮肤/后脑)") # 中央区剪除(鼻侧多余填充) holes = ~mask & ~self.flood_outside(mask) hl = np.zeros(mask.shape, np.int32) big_holes = [] for j in range(mask.shape[0]): for i in range(mask.shape[1]): if holes[j, i] and hl[j, i] == 0: hl[j, i] = 1 q = deque([(j, i)]) pts = [(j, i)] while q: y, x = q.popleft() for dy, dx in ((1,0),(-1,0),(0,1),(0,-1), (1,1),(1,-1),(-1,1),(-1,-1)): ny, nx = y + dy, x + dx if (0 <= ny < mask.shape[0] and 0 <= nx < mask.shape[1] and holes[ny, nx] and hl[ny, nx] == 0): hl[ny, nx] = 1 q.append((ny, nx)) pts.append((ny, nx)) if len(pts) >= 500: big_holes.append(pts) if len(big_holes) >= 2: big_holes.sort(key=len, reverse=True) h_l, h_r = sorted(big_holes[:2], key=lambda pts: sum(p[1] for p in pts) / len(pts)) bl = (min(p[1] for p in h_l), max(p[1] for p in h_l), min(p[0] for p in h_l)) br = (min(p[1] for p in h_r), max(p[1] for p in h_r), min(p[0] for p in h_r)) x_in_l, x_in_r = bl[1], br[0] y_cut = min(bl[2], br[2]) if x_in_l < x_in_r: cut = np.zeros_like(mask, bool) cut[:y_cut, x_in_l + 1:x_in_r] = True n_cut = int((mask & cut).sum()) mask &= ~cut self.log(f" 中央区剪除(两镜片开口之间, 开口底缘 y>{self.Y0 + y_cut * self.RES:.1f} 以下): " f"剔除 {n_cut} 格误标鼻面") else: self.log(" ! 未找到两个镜片开口, 跳过中央区剪除") # 膨胀 3 格 mask = self.dilate_8(mask, 3) # 补内部洞 (镜片开口) holes = self.flood_outside(mask) self.log(f" 足迹 {mask.sum()} 格, 补内部洞 {holes.sum()} 格 (镜片开口)") mask = mask | holes # 腐蚀 eroded = self.erode_4(mask, self.ERODE) # y 裁剪 + 最大连通块 H, W = eroded.shape jj = np.arange(H) eroded = eroded & (jj[:, None] >= int((self.RY0 - self.Y0) / self.RES)) & \ (jj[:, None] <= int((self.RY1 - self.Y0) / self.RES)) R = np.zeros_like(eroded) seen = np.zeros_like(eroded, bool) best = None for j0 in range(H): for i0 in range(W): if eroded[j0, i0] and not seen[j0, i0]: comp = [] dq = deque([(j0, i0)]) seen[j0, i0] = True touch = False while dq: j, i = dq.popleft() comp.append((j, i)) if i in (0, W - 1) or j in (0, H - 1): touch = True for dj, di in ((1,0),(-1,0),(0,1),(0,-1)): nj, ni = j + dj, i + di if 0 <= nj < H and 0 <= ni < W and eroded[nj, ni] and not seen[nj, ni]: seen[nj, ni] = True dq.append((nj, ni)) if best is None or len(comp) > len(best[0]): best = (comp, touch) if best is None: raise SystemExit("R 为空: 足迹检测失败") comp, touch = best for j, i in comp: R[j, i] = True self.log(f" R: {R.sum()} 格 ({R.sum()*self.RES*self.RES:.2f} 面积单位), " f"触碰窗口边界={touch} (触碰=侧墙切在头内部, 正常)") if R.sum() < 200: raise SystemExit("R 过小") return mask, R # ====================================================================== # 步骤 4: 构造填充前/后高度场 # ====================================================================== def build_height_fields(self, gz1, gz2, fz, bz, have_g1, have_f, have_b, g1f, mask, R): """构造填充前/后高度场""" self.log("== 4. 构造填充前/后高度场 ==") H, W = gz1.shape gx, gy = np.meshgrid(self.X0 + np.arange(W) * self.RES, self.Y0 + np.arange(H) * self.RES) # ---- 修补眼镜表面 ---- g1c = self.dilate_8(g1f, 2) g1c = self.erode_4(g1c, 2) g1c |= g1f # 修补针孔 gz1f = np.where(g1f, gz1, -np.inf) nb = [] for dj, di in ((1,0),(-1,0),(0,1),(0,-1),(1,1),(1,-1),(-1,1),(-1,-1)): s = np.full_like(gz1, np.nan) if dj == 1: s[1:, :] = gz1[:-1, :] elif dj == -1: s[:-1, :] = gz1[1:, :] elif di == 1: s[:, 1:] = gz1[:, :-1] elif di == -1: s[:, :-1] = gz1[:, 1:] elif dj == 1 and di == 1: s[1:, 1:] = gz1[:-1, :-1] elif dj == 1 and di == -1: s[1:, :-1] = gz1[:-1, 1:] elif dj == -1 and di == 1: s[:-1, 1:] = gz1[1:, :-1] else: s[:-1, :-1] = gz1[1:, 1:] nb.append(s) nb = np.stack(nb) valid_nb = nb > -1e29 with np.errstate(all='ignore'): nbmed = np.nanmedian(np.where(valid_nb, nb, np.nan), axis=0) pin = g1f & np.isfinite(nbmed) & (gz1 < nbmed - 0.4) gz1d = self.dilate_8_inf(gz1f, 3) gz1f = np.where(g1f & ~pin, gz1, gz1d) self.log(f" 顶面针孔修补: {int(pin.sum())} 格 (孤立低谷, 用邻域最大值补回顶面)") nfill = int((g1c & ~g1f & R & (gz1f >= 7.0)).sum()) self.log(f" 镜框带补栅格化角落缺口: {nfill} 格") # ---- 框前面拟合 ---- mfit = g1c & R & (gz1f >= 7.0) # 框带定义 eR = self.erode_4(R, 3) outer_band = R & ~eR frame_band = (g1c & R) | (outer_band & (gz1f > -1e29)) # 陡斜坡外缘钳制 mdil = np.where(g1f, gz1, np.inf) mdil = self.erode_4_inf(mdil, 3) fringe = frame_band & ~g1f gz1f = np.where(fringe & (mdil < 1e29), np.minimum(gz1f, mdil), gz1f) gz1f = np.where(fringe, self.smooth_valid(gz1f, fringe, sigma=2.0, it=1), gz1f) # 稳健二次拟合 xp, yp, zp = gx[mfit], gy[mfit], gz1f[mfit] wt = np.ones(len(zp)) for _ in range(3): Aw = self.pbasis(xp, yp) * wt[:, None] coef, *_ = np.linalg.lstsq(Aw, zp * wt, rcond=None) rfit = zp - self.pbasis(xp, yp) @ coef wt = 1.0 / (1.0 + (np.abs(rfit) / 0.5) ** 2) zfit = (self.pbasis(gx.ravel(), gy.ravel()) @ coef).reshape(H, W) rf = np.abs((zfit - gz1f)[mfit]) self.log(f" 框前面拟合(稳健): 残差 mean {rf.mean():.3f}, p90 {np.percentile(rf, 90):.3f}, " f"max {rf.max():.3f}") # 残差场调和延拓 mfit2 = mfit & (np.abs(gz1f - zfit) <= 1.0) resf = np.full((H, W), np.nan) resf[mfit2] = gz1f[mfit2] - zfit[mfit2] resf = self.smooth_valid(resf, mfit2, sigma=2.5) Rext = self.laplace_fill(resf, mfit2) Rext = np.where(R, Rext, np.nan) # ---- 前表面 ---- hf = np.full((H, W), np.nan) hf[frame_band] = gz1f[frame_band] - self.FLUSH openf = R & ~frame_band hfo = np.where(openf, zfit + Rext - self.FLUSH, np.nan) # 开口区安全钳制 gmax2 = np.where(mfit, gz1f, -np.inf) gmax2 = self.dilate_8_inf(gmax2, 3) hfo = np.where(openf & (gmax2 > -1e29), np.minimum(hfo, gmax2 - self.FLUSH), hfo) hfo = self.smooth_valid(hfo, openf, sigma=2.0, it=2) hf = np.where(openf & np.isfinite(hfo), hfo, hf) hf = self.smooth_valid(hf, R, sigma=1.5) # 墙区安全钳制 edge_in = self.erode_4(R, 4) wall_zone = R & ~edge_in hf = np.where(frame_band & wall_zone, np.minimum(hf, gz1f - self.FLUSH), hf) hf = np.where(frame_band & ~wall_zone, np.minimum(hf, gz1f + 0.10), hf) # 交界连续性检查 jn, jn_at = 0.0, None bflat = mfit2 & (gz1f > zfit - 0.3) for dj, di in ((1,0),(-1,0),(0,1),(0,-1)): a = np.roll(bflat, (dj, di), axis=(0, 1)) & openf & np.isfinite(hf) if a.any(): b = np.roll(a, (-dj, -di), axis=(0, 1)) dd = np.abs(np.where(a, hf, 0.0)[a] - np.where(np.isfinite(hf), hf, 0.0)[b]) k = int(np.nanargmax(dd)) if dd[k] > jn: ja = np.argwhere(a)[k] jn, jn_at = float(dd[k]), (self.X0 + ja[1] * self.RES, self.Y0 + ja[0] * self.RES) self.log(f" 交界处高度跳变最大 {jn:.3f} @ {jn_at} (平面前框带接缝应<0.3; " "镜圈圆角处~0.4为镜框自身几何, 并集后不暴露)") # ---- 后表面 ---- hb = np.full((H, W), np.nan) real_f = have_f & (fz >= self.FACE_MIN) hb[real_f] = fz[real_f] - self.EMBED_BOT knownb = R & real_f hb = self.laplace_fill(hb, knownb) hb = self.smooth_valid(hb, R) cap = hf - self.SHELL_MAX ncap = int((R & ~real_f & np.isfinite(hb) & (hb < cap)).sum()) hb = np.where(R & ~real_f, np.maximum(hb, cap), hb) self.log(f" 厚度上限(无真实脸面处, 距前面>{self.SHELL_MAX})生效格数: {ncap}") hb = np.where(R & real_f, np.minimum(hb, fz - 0.25), hb) bzs = self.smooth_valid(np.where(have_b, bz, np.nan), have_b) hb = np.where(R, hb, np.nan) hb = np.where(have_b, np.maximum(hb, bzs + self.CLAMP_BACK), hb) hb = np.minimum(hb, hf - self.GAP_MIN) # 外扩填充 NaN for _ in range(60): nanm = ~np.isfinite(hf) if not nanm.any(): break for dj, di in ((1,0),(-1,0),(0,1),(0,-1)): s = np.roll(np.where(nanm, 0, hf), (dj, di), axis=(0, 1)) ok = ~np.roll(nanm, (dj, di), axis=(0, 1)) & np.isfinite(s) hf = np.where(nanm & ok, s, hf) for _ in range(60): nanm = ~np.isfinite(hb) if not nanm.any(): break for dj, di in ((1,0),(-1,0),(0,1),(0,-1)): s = np.roll(np.where(nanm, 0, hb), (dj, di), axis=(0, 1)) ok = ~np.roll(nanm, (dj, di), axis=(0, 1)) & np.isfinite(s) hb = np.where(nanm & ok, s, hb) thickm = np.where(R, hf - hb, np.nan) self.log(f" 填充厚度: min {np.nanmin(thickm):.2f}, 中位 {np.nanmedian(thickm):.2f}, " f"mean {np.nanmean(thickm):.2f}, max {np.nanmax(thickm):.2f}") return hf, hb, frame_band, wall_zone, gz1f, bzs, real_f, fz # ====================================================================== # 步骤 5: 边界提取与平滑 # ====================================================================== def extract_and_smooth_boundary(self, R, mask, g1f): """提取并平滑边界""" self.log("== 5. 边界提取与平滑 ==") H, W = R.shape # 裂缝边链成回路 edges = {} def add_edge(a, b): edges.setdefault(a, []).append(b) for j in range(H): for i in range(W): if not R[j, i]: continue if i == 0 or not R[j, i - 1]: add_edge((i, j), (i, j + 1)) if i == W - 1 or not R[j, i + 1]: add_edge((i + 1, j + 1), (i + 1, j)) if j == 0 or not R[j - 1, i]: add_edge((i + 1, j), (i, j)) if j == H - 1 or not R[j + 1, i]: add_edge((i, j + 1), (i + 1, j + 1)) if not edges: raise SystemExit("无边界") start = next(iter(edges)) loop = [start] cur = edges[start].pop(0) used = {(start, cur)} while cur != start: loop.append(cur) nxts = [e for e in edges.get(cur, []) if (cur, e) not in used] if not nxts: break nxt = nxts[0] used.add((cur, nxt)) cur = nxt P = np.array([[self.X0 + i * self.RES, self.Y0 + j * self.RES] for (i, j) in loop], float) area2 = np.sum(P[:, 0] * np.roll(P[:, 1], -1) - np.roll(P[:, 0], -1) * P[:, 1]) if area2 < 0: P = P[::-1] self.log(f" 边界回路 {len(P)} 点, 周长 {np.linalg.norm(np.roll(P,-1,0)-P,axis=1).sum():.2f}") def resample(P, step): d = np.linalg.norm(np.roll(P, -1, 0) - P, axis=1) L = np.concatenate([[0], np.cumsum(d)]) total = L[-1] n = max(8, int(round(total / step))) t = np.linspace(0, total, n, endpoint=False) x = np.interp(t, L, np.concatenate([P[:, 0], P[:1, 0]])) y = np.interp(t, L, np.concatenate([P[:, 1], P[:1, 1]])) return np.stack([x, y], 1) def roughness(P): d = np.roll(P, -1, 0) - P a = np.arctan2(d[:, 1], d[:, 0]) da = np.abs((a - np.roll(a, -1) + np.pi) % (2 * np.pi) - np.pi) return float(da.mean()), float(da.std()) r0 = roughness(P) B = resample(P, self.BSTEP) for _ in range(self.BITER): B = (1 - self.BLAM) * B + self.BLAM * 0.5 * (np.roll(B, 1, 0) + np.roll(B, -1, 0)) # 面积恢复 areaR = R.sum() * self.RES * self.RES for _ in range(30): aB = 0.5 * abs(np.sum(B[:, 0] * np.roll(B[:, 1], -1) - np.roll(B[:, 0], -1) * B[:, 1])) if aB >= 0.97 * areaR: break c = B.mean(0) s = np.sqrt(0.97 * areaR / max(aB, 1e-9)) s = min(s, 1.05) B = c + (B - c) * s B = resample(B, self.BSTEP) r1 = roughness(B) self.log(f" 边界粗糙度(平均转折角/标准差): 平滑前 {np.degrees(r0[0]):.2f}°/{np.degrees(r0[1]):.2f}° " f"-> 平滑后 {np.degrees(r1[0]):.2f}°/{np.degrees(r1[1]):.2f}°") # 边界须压在镜框带上 bad = ~self.inside_mask(B, mask) if bad.any(): c = B.mean(0) for k in np.where(bad)[0]: p = B[k] for s in np.linspace(0.1, 0.9, 30): q = c + s * (p - c) if self.inside_mask(q[None, :], mask)[0]: B[k] = q break for _ in range(10): B = (1 - self.BLAM) * B + self.BLAM * 0.5 * ( np.roll(B, 1, 0) + np.roll(B, -1, 0)) B = resample(B, self.BSTEP) bii = np.clip(((B[:, 0] - self.X0) / self.RES).astype(int), 0, W - 1) bjj = np.clip(((B[:, 1] - self.Y0) / self.RES).astype(int), 0, H - 1) nb = np.zeros(len(B), bool) for dj, di in ((0,0),(1,0),(-1,0),(0,1),(0,-1),(1,1),(1,-1),(-1,1),(-1,-1)): jj2 = np.clip(bjj + dj, 0, H - 1); ii2 = np.clip(bii + di, 0, W - 1) nb |= g1f[jj2, ii2] self.log(f" 平滑边界 {len(B)} 点, 超出足迹 {int((~self.inside_mask(B, mask)).sum())}, " f"压在镜框带上 {nb.mean()*100:.1f}%") return B, loop # ====================================================================== # 步骤 6: 三角剖分 (耳切法 + 内部点插入) # ====================================================================== def ear_clip(self, P): """P 为 CCW 简单多边形, 返回三角形索引列表""" idx = list(range(len(P))) tris = [] guard = 0 while len(idx) > 3 and guard < 5000: guard += 1 m = len(idx) best_k, best_score = None, None for k in range(m): i0, i1, i2 = idx[(k - 1) % m], idx[k], idx[(k + 1) % m] a, b, c = P[i0], P[i1], P[i2] cr = self.cross3(a, b, c) if cr <= 1e-10: continue inside_any = False for j in idx: if j in (i0, i1, i2): continue p = P[j] if (self.cross3(a, b, p) >= -1e-12 and self.cross3(b, c, p) >= -1e-12 and self.cross3(c, a, p) >= -1e-12): inside_any = True break if not inside_any: lab = np.hypot(*(np.subtract(b, a))); lac = np.hypot(*(np.subtract(c, a))) lbc = np.hypot(*(np.subtract(c, b))) score = cr / max(lab * lac, lab * lbc, lac * lbc, 1e-12) if best_score is None or score > best_score: best_k, best_score = k, score if best_k is None: m = len(idx) areas = [(self.cross3(P[idx[(k-1)%m]], P[idx[k]], P[idx[(k+1)%m]]), k) for k in range(m)] areas.sort(reverse=True) best_k = areas[0][1] self.log(" ! 耳切兜底触发") i0, i1, i2 = (idx[(best_k - 1) % len(idx)], idx[best_k], idx[(best_k + 1) % len(idx)]) tris.append((i0, i1, i2)) idx.pop(best_k) tris.append((idx[0], idx[1], idx[2])) return tris def triangulate_fill(self, B, R, hf, hb): """对填充区域进行三角剖分""" self.log("== 6. 区域三角化 (耳切法 + 内部网格点插入, 无翻转风险) ==") H, W = R.shape Nb = len(B) # 耳切三角化 T = np.asarray(self.ear_clip(B.tolist()), np.int64) self.log(f" 耳切三角化: {len(T)} 三角形") # 内部点候选 inner2 = R.copy() for _ in range(2): ne = inner2.copy() ne[1:, :] &= inner2[:-1, :]; ne[:-1, :] &= inner2[1:, :] ne[:, 1:] &= inner2[:, :-1]; ne[:, :-1] &= inner2[:, 1:] inner2 = ne step = max(1, int(round(0.3 / self.RES))) cand = [] for j in range(0, H, step): for i in range(0, W, step): if inner2[j, i]: cand.append((self.X0 + i * self.RES, self.Y0 + j * self.RES)) cand = np.asarray(cand) self.log(f" 内部插入点候选 {len(cand)}") # 逐点插入 xy = np.vstack([B, cand]) n_cand = len(cand) extra = 0 Ta = [list(map(int, t)) for t in T] for ci in range(n_cand): p = xy[Nb + ci] m = len(Ta) TA = np.asarray(Ta) a = xy[TA[:, 0]]; b = xy[TA[:, 1]]; c = xy[TA[:, 2]] d = ((b[:, 1] - c[:, 1]) * (a[:, 0] - c[:, 0]) + (c[:, 0] - b[:, 0]) * (a[:, 1] - c[:, 1])) with np.errstate(divide='ignore', invalid='ignore'): l1 = ((b[:, 1] - c[:, 1]) * (p[0] - c[:, 0]) + (c[:, 0] - b[:, 0]) * (p[1] - c[:, 1])) / d l2 = ((c[:, 1] - a[:, 1]) * (p[0] - c[:, 0]) + (a[:, 0] - c[:, 0]) * (p[1] - c[:, 1])) / d l3 = 1 - l1 - l2 hit = np.where((l1 > 5e-3) & (l2 > 5e-3) & (l3 > 5e-3) & (l1 < 1 - 5e-3) & (l2 < 1 - 5e-3) & (l3 < 1 - 5e-3))[0] if len(hit) == 0: continue t = int(hit[0]) i0, i1, i2 = Ta[t] vnew = Nb + ci Ta[t] = [i0, i1, vnew] Ta.append([i1, i2, vnew]) Ta.append([i2, i0, vnew]) extra += 1 T = np.asarray([t for t in Ta if t[0] != t[1] and t[1] != t[2] and t[0] != t[2]], np.int64) xy = xy[:Nb + n_cand] # 内部顶点轻度 Laplacian 平滑 es = np.unique(np.sort(np.concatenate([T[:, [0, 1]], T[:, [1, 2]], T[:, [2, 0]]]), axis=1), axis=0) src = np.concatenate([es[:, 0], es[:, 1]]) dst = np.concatenate([es[:, 1], es[:, 0]]) deg = np.bincount(src, minlength=len(xy)).astype(float) def tri_areas(xy, T): cr = xy[T[:, 1]] - xy[T[:, 0]] cs = xy[T[:, 2]] - xy[T[:, 0]] return cr[:, 0] * cs[:, 1] - cr[:, 1] * cs[:, 0] xy_best = xy.copy() for _ in range(8): sx = np.bincount(src, weights=xy[dst, 0], minlength=len(xy)) sy = np.bincount(src, weights=xy[dst, 1], minlength=len(xy)) new = np.stack([sx, sy], 1) / np.maximum(deg, 1)[:, None] xy2 = xy.copy() xy2[Nb:] = 0.5 * xy[Nb:] + 0.5 * new[Nb:] if tri_areas(xy2, T).min() > 1e-6: xy = xy2 xy_best = xy2.copy() else: break xy = xy_best # 边翻转优化 def flip_pass(Tl, XY): em = {} for fi, t in enumerate(Tl): a, b, c = t for u, v in ((a, b), (b, c), (c, a)): em.setdefault((min(u, v), max(u, v)), []).append(fi) eset = set(em) n = 0 for (u, v), fs in em.items(): if len(fs) != 2: continue f1, f2 = fs if not (u in Tl[f1] and v in Tl[f1] and u in Tl[f2] and v in Tl[f2]): continue w1 = next(x for x in Tl[f1] if x != u and x != v) w2 = next(x for x in Tl[f2] if x != u and x != v) if w1 == w2 or (min(w1, w2), max(w1, w2)) in eset: continue pu, pv = XY[u], XY[v] s1 = (pv[0]-pu[0])*(XY[w1][1]-pu[1]) - (pv[1]-pu[1])*(XY[w1][0]-pu[0]) s2 = (pv[0]-pu[0])*(XY[w2][1]-pu[1]) - (pv[1]-pu[1])*(XY[w2][0]-pu[0]) if s1 * s2 >= 0: continue q1, q2 = XY[w1], XY[w2] s3 = (q2[0]-q1[0])*(pu[1]-q1[1]) - (q2[1]-q1[1])*(pu[0]-q1[0]) s4 = (q2[0]-q1[0])*(pv[1]-q1[1]) - (q2[1]-q1[1])*(pv[0]-q1[0]) if s3 * s4 >= 0: continue if np.hypot(*(XY[w2] - XY[w1])) >= np.hypot(*(XY[v] - XY[u])): continue if s1 > 0: Tl[f1] = [u, w2, w1] Tl[f2] = [v, w1, w2] else: Tl[f1] = [u, w1, w2] Tl[f2] = [v, w2, w1] eset.add((min(w1, w2), max(w1, w2))) n += 1 return n Tlist = [list(map(int, t)) for t in T] nflips = 0 for _p in range(200): k = flip_pass(Tlist, xy) nflips += k if k == 0: break self.log(f" 边翻转优化: {nflips} 次, 收敛于 {_p+1} 趟") # 残余长边细分 MAXEDGE = 0.5 nsplit = 0 for _p in range(6): emap = {} for fi, (a, b, c) in enumerate(Tlist): for u, v in ((a, b), (b, c), (c, a)): emap.setdefault((min(u, v), max(u, v)), []).append(fi) longe = [(u, v) for (u, v) in emap if np.hypot(*(xy[v] - xy[u])) > MAXEDGE] if not longe: break mid = {} newpts = [] for u, v in longe: mid[(u, v)] = len(xy) + len(newpts) newpts.append((xy[u] + xy[v]) / 2.0) xy = np.vstack([xy, np.asarray(newpts)]) nsplit += len(newpts) newT = [] for (a, b, c) in Tlist: mab = mid.get((min(a, b), max(a, b))) mbc = mid.get((min(b, c), max(b, c))) mca = mid.get((min(c, a), max(c, a))) if mab is None and mbc is None and mca is None: newT.append([a, b, c]) elif mbc is None and mca is None: newT += [[a, mab, c], [mab, b, c]] elif mab is None and mca is None: newT += [[a, b, mbc], [a, mbc, c]] elif mab is None and mbc is None: newT += [[a, b, mca], [mca, b, c]] elif mca is None: newT += [[a, mab, mbc], [mab, b, mbc], [a, mbc, c]] elif mab is None: newT += [[a, b, mbc], [a, mbc, mca], [mbc, c, mca]] elif mbc is None: newT += [[a, mab, mca], [mab, b, c], [mab, c, mca]] else: newT += [[a, mab, mca], [mab, b, mbc], [mca, mbc, c], [mab, mbc, mca]] Tlist = newT T = np.asarray(Tlist, np.int64) self.log(f" 残余长边细分(>{MAXEDGE}): 新增 {nsplit} 中点, 总三角形 {len(T)}") cr = xy[T[:, 1]] - xy[T[:, 0]] cs = xy[T[:, 2]] - xy[T[:, 0]] area = cr[:, 0] * cs[:, 1] - cr[:, 1] * cs[:, 0] if area.min() <= 0: raise SystemExit(f"三角形定向异常 (min area {area.min():.2e})") self.log(f" 实际插入 {extra} 点, 总三角形 {len(T)}, 最小有向面积 {area.min():.5f} (>0 = 无翻转)") # 计算 z 坐标 zf = self.bilinear(hf, xy) zb = self.bilinear(hb, xy) zb = np.minimum(zb, zf - 0.15) zb = np.maximum(zb, zf - 50) Pf = np.column_stack([xy, zf]) Pb = np.column_stack([xy, zb]) return Pf, Pb, T, xy # ====================================================================== # 步骤 7: 组装实体 (前/后表面 + 侧墙) # ====================================================================== def assemble_mesh(self, Pf, Pb, T): """组装填充实体: 前表面 + 后表面 + 侧墙""" self.log("== 7. 组装填充实体 ==") nV = len(Pf) faces = [] # 前表面 (法向 +z, 向外) for a, b, c in T: faces.append((a, b, c)) # 后表面 (翻转, 法向 -z, 向外) for a, b, c in T: faces.append((a + nV, c + nV, b + nV)) # 侧墙: 提取边界环 dired = {} unded = {} for a, b, c in T: for u, v in ((a, b), (b, c), (c, a)): dired[(u, v)] = dired.get((u, v), 0) + 1 for (u, v) in dired: unded[(min(u, v), max(u, v))] = unded.get((min(u, v), max(u, v)), 0) + 1 bnext = {} for (u, v) in dired: if unded[(min(u, v), max(u, v))] == 1: bnext[u] = v ring = [next(iter(bnext))] while bnext[ring[-1]] != ring[0]: ring.append(bnext[ring[-1]]) Nr = len(ring) for i in range(Nr): u, v = ring[i], ring[(i + 1) % Nr] faces.append((u, v + nV, v)) # (F_i, B_{i+1}, F_{i+1}) faces.append((u, u + nV, v + nV)) # (F_i, B_i, B_{i+1}) Ff = np.asarray(faces, np.int64) Pall = np.vstack([Pf, Pb]) return Pall, Ff, nV # ====================================================================== # 步骤 8: 校验 # ====================================================================== def validate_mesh(self, Pall, Ff, Pf, Pb, T, V, F, hf, hb, gz1f, frame_band, wall_zone, bzs, have_b, real_f, fz, R, xy): """对生成的网格进行各项校验""" self.log("== 8. 校验 ==") # 定向校验 vfill = self.signed_volume(Pall, Ff) vorig = self.signed_volume(V, F) if vfill * vorig < 0: Ff = Ff[:, [0, 2, 1]] vfill = -vfill # 期望体积 area = np.cross(Pf[T[:, 1]] - Pf[T[:, 0]], Pf[T[:, 2]] - Pf[T[:, 0]])[:, 2] exp_vol = float(np.sum(0.5 * np.abs(area) * ((Pf[T[:, 0], 2] + Pf[T[:, 1], 2] + Pf[T[:, 2], 2] - Pb[T[:, 0], 2] - Pb[T[:, 1], 2] - Pb[T[:, 2], 2]) / 3.0))) self.log(f" 填充实体体积 {vfill:.2f} (期望 {exp_vol:.2f}), 原模型 {vorig:.0f}, 定向一致") if abs(vfill - exp_vol) > 0.02 * abs(exp_vol) + 1e-6: raise SystemExit("体积校验失败: 面片定向不一致") # 水密性 e2 = np.sort(np.concatenate([Ff[:, [0, 1]], Ff[:, [1, 2]], Ff[:, [2, 0]]]), axis=1) ue, cnt = np.unique(e2, axis=0, return_counts=True) de = np.concatenate([Ff[:, [0, 1]], Ff[:, [1, 2]], Ff[:, [2, 0]]]) ude, udcnt = np.unique(de, axis=0, return_counts=True) self.log(f" 水密性: 非流形边(计数!=2) {int((cnt != 2).sum())} / {len(ue)}, " f"方向冲突边 {int((udcnt != 1).sum())} (两者都应为 0)") # 镜片光滑度 nv = np.cross(Pall[Ff[:, 1]] - Pall[Ff[:, 0]], Pall[Ff[:, 2]] - Pall[Ff[:, 0]]) nv = nv / np.linalg.norm(nv, axis=1, keepdims=True) fcen = Pall[Ff].mean(1) emap2 = {} for fi, (a, b, c) in enumerate(Ff): for u, v in ((a, b), (b, c), (c, a)): emap2.setdefault((min(u, v), max(u, v)), []).append(fi) lang, lloc = [], [] for (u, v), fs in emap2.items(): if len(fs) == 2 and nv[fs[0], 2] > 0.5 and nv[fs[1], 2] > 0.5: m = fcen[fs[0]] if 2.2 < abs(m[0]) < 6.3 and 12.5 < m[1] < 16.2: lang.append(np.degrees(np.arccos(np.clip(nv[fs[0]] @ nv[fs[1]], -1, 1)))) lloc.append(m) lang = np.asarray(lang) if len(lang): k = np.argmax(lang) self.log(f" 镜片光滑度(相邻面二面角): 中位 {np.median(lang):.2f}°, " f"p90 {np.percentile(lang, 90):.2f}°, " f"max {lang[k]:.2f}° @ ({lloc[k][0]:.1f},{lloc[k][1]:.1f}) (中位应<2°)") # 嵌入校验 gmargin = (gz1f - hf)[R & frame_band & wall_zone] self.log(f" 前表面低于本地框面(墙区): 最小余量 {np.nanmin(gmargin):.3f} (应>0)") gmargin2 = (gz1f - hf)[R & frame_band] self.log(f" 前表面低于本地框面(内部允许贴齐): 最小余量 {np.nanmin(gmargin2):.3f} (应>-0.10)") bmargin = (hb - bzs)[R & have_b] self.log(f" 后表面高于最后表面: 最小余量 {np.nanmin(bmargin):.3f} (应>0)") embed = (fz - hb)[R & real_f] self.log(f" 底面嵌入真实脸面: 最小 {np.nanmin(embed):.3f} (应>-0.05, 负=缝隙), " f"中位 {np.nanmedian(embed):.2f}") inR = self.inside_mask(xy, R) self.log(f" 圆盘顶点落在 R 内比例 {inR.mean()*100:.1f}%") return Ff, vfill # ====================================================================== # 步骤 9: 输出 # ====================================================================== def output_mesh(self, Pall, Ff, V, F): """输出填充网格和合并后的模型""" self.log("== 9. 输出 ==") # 输出填充网格 with open(self.OUT_FILL, "w") as f: f.write("# fill mesh between glasses and face\n") f.write("o fill\n") for p in Pall: f.write(f"v {p[0]:.5f} {p[1]:.5f} {p[2]:.5f}\n") for a, b, c in Ff: f.write(f"f {a+1} {b+1} {c+1}\n") self.log(f" {self.OUT_FILL}: {len(Pall)} 顶点, {len(Ff)} 面") # 输出合并模型 with open(self.IN_OBJ) as f: orig = f.read() with open(self.OUT_MERGED, "w") as f: f.write(orig.rstrip("\n") + "\n") f.write("o fill\n") off = len(V) for p in Pall: f.write(f"v {p[0]:.5f} {p[1]:.5f} {p[2]:.5f}\n") for a, b, c in Ff: f.write(f"f {a+1+off} {b+1+off} {c+1+off}\n") self.log(f" {self.OUT_MERGED}: 原模型 + 填充 (顶点偏移 {off})") # ====================================================================== # 步骤 10: 生成预览图 # ====================================================================== def generate_preview(self, gz1, hf, hb, R, B): """生成前视图深度预览""" self.log("== 10. 生成预览图 ==") H, W = self.H, self.W # 合成前表面深度图 front = np.where(np.isfinite(gz1) & (gz1 > -1e30), gz1, np.nan) mix = np.where(R & np.isfinite(hf), np.where(np.isfinite(front), np.maximum(front, hf), hf), front) front = mix panels = [] span = (4, 12) def to_img(Grd, span): G = np.where(np.isfinite(Grd), Grd, span[0]) t = np.clip((G - span[0]) / (span[1] - span[0]), 0, 1) return (t * 255).astype(np.uint8) for name, Grd in (("front-depth", front), ("fill-front", np.where(R, hf, np.nan)), ("thickness", np.where(R, hf - hb, np.nan))): im = Image.fromarray(to_img(np.flipud(Grd), span if "thick" not in name else (0, 4))) im = im.resize((W * 4, H * 4), Image.NEAREST) d = ImageDraw.Draw(im) pts = [((b[0] - self.X0) / self.RES * 4, (self.Y1 - b[1]) / self.RES * 4) for b in B] d.line(pts + pts[:1], fill=255, width=2) panels.append((name, im)) cw = sum(p.width for _, p in panels) + 20 ch = max(p.height for _, p in panels) combo = Image.new("L", (cw, ch), 60) xoff = 0 for name, p in panels: combo.paste(p, (xoff, 0)) xoff += p.width + 10 combo.save(self.OUT_PREVIEW) self.log(f" {self.OUT_PREVIEW}: 3 面板(前深度/填充前表面/厚度), 红线=平滑边界") # ====================================================================== # 主流程 run() # ====================================================================== def run(self): """执行完整填充网格生成流程""" # 步骤 1: 加载模型 V, F, face_g = self.load_and_classify() # 步骤 2: 栅格化 gz1, gz2, fz, bz, have_g1, have_g2, have_f, have_b, g1f, W, H = \ self.rasterize(V, F, face_g) self.W, self.H = W, H # 步骤 3: 构建足迹 mask, R = self.build_footprint(g1f) # 步骤 4: 构造高度场 hf, hb, frame_band, wall_zone, gz1f, bzs, real_f, fz = \ self.build_height_fields(gz1, gz2, fz, bz, have_g1, have_f, have_b, g1f, mask, R) # 步骤 5: 边界提取与平滑 B, loop = self.extract_and_smooth_boundary(R, mask, g1f) # 步骤 6: 三角剖分 Pf, Pb, T, xy = self.triangulate_fill(B, R, hf, hb) # 步骤 7: 组装实体 Pall, Ff, nV = self.assemble_mesh(Pf, Pb, T) # 步骤 8: 校验 Ff, vfill = self.validate_mesh(Pall, Ff, Pf, Pb, T, V, F, hf, hb, gz1f, frame_band, wall_zone, bzs, have_b, real_f, fz, R, xy) # 步骤 9: 输出 self.output_mesh(Pall, Ff, V, F) # 步骤 10: 预览图 self.generate_preview(gz1, hf, hb, R, B) self.log("\n== 完成 ==") with open("fill_report.txt", "w") as f: f.write("\n".join(self.report) + "\n") print("报告已写入 fill_report.txt") # ====================================================================== # 入口 # ====================================================================== if __name__ == "__main__": gen = FillMeshGenerator() gen.run()